• 雙軌勁拓無鉛回流焊
  • 雙軌勁拓無鉛回流焊
  • 雙軌勁拓無鉛回流焊
  • 雙軌勁拓無鉛回流焊
  • 雙軌勁拓無鉛回流焊

雙軌勁拓無鉛回流焊

型號︰

JTR-800

品牌︰

勁拓

原產地︰

中國

單價︰

CNY ¥ 98500 / 台

最少訂量︰

1 台

產品描述

回流焊參數
型號 MODEL VS-800II / NS-800II VS-1000II / NS-1000II VS-800IIX / NS-800IIX VS-1000IIX / NS-1000IIX
機體參數 GENERAL        
外型尺寸(L*W*H) Outside Dimension(L*W*H) 5310x1353x1490mm 6100x1353x1490mm 5310x1580x1490mm 6100x1580x1490mm
顏色            Standard Color 計算機灰 Computer Grey 計算機灰 Computer Grey 計算機灰 Computer Grey 計算機灰 Computer Grey
重量 Weight Approx.2250KG Approx.2450KG Approx.2350KG Approx.2550KG
加熱區數量 Number Of Heating Zones 上Up8/下Bottom8 上Up10/下Bottom10 上Up8/下Bottom8 上Up10/下Bottom10
加熱區長度 Length Of Heating Zones 3121mm 3891mm 3121mm 3891mm
冷卻區數量 Number Of Cooling Zones 2(內置)
排風量要求 Exhaust Volume  10 M3 / min x 2 (通道) Exhausts
控制部分參數 Standard Feature Of Control System
電氣要求 Electric Supply Required 3 phase,380V 50/60Hz(optional: 3 phase,220V 50/60Hz 選配)
電源功率要求 Electric Power Required 64KW 80KW 64KW 80KW
啟動功率 Power For Warm Up 30KW 36KW 32KW 38KW
正常功率消耗 Power Consumption 11KW 13KW 12KW 14KW
升溫時間 Warming Time 約 Approx.25 minute 約 Approx.35 minute
溫度控制範圍 Temp. Setting Range 室溫 Room Temp. --- 300℃
溫度控制方式 Temperature Control Method PID閉環控制 + SSR驅動 / PID Close Loop Control + SSR Driving
溫度控制精度 Temperature Control Precision ± 1.0℃
PCB板溫分布偏差 Temperature Deviation on PCB ± 1.5℃ (by JT Board Test Standard)
加熱器   Heating Element    Especial Heating elements For Long Life ; 特製的特長壽命加熱器
Commutated Element     整流板結構 Aluminium Alloy Plate 鋁板
Max. Temp. Gap Between Preheat & Reflow Setting 
預熱區和焊接區之間的 溫度設定差值 
80℃
Max. Temp. Gap Between Preheat Zones Setting 
預熱區之間的 溫度設定差值 
40℃
Max. Temp. Gap Between Reflow Zones Setting 
焊接區之間的 溫度設定差值 
50℃
參數存儲 Data Storage 可存多種生產設置參數與狀況 Process Data and Status Storage (80GB)
異常報警 Abnormal Alarm 溫度異常(恆溫后超高溫或超低溫)Abnormal Temperature (Extra-high / Extra-low Temp.)
掉板報警 Board Dropped Alarm 三色信號燈: 黃-升溫;綠-恆溫;紅-異常 Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal
運輸參數 Standard Features Of Conveyor System  
導軌數量 1 Lane  2 Lanes
Rail Structure   導軌結構 Subsection Integrated Type 整體分段式 Subsection Separate Control分段獨立控制(Option選配)
PCB 寬度 Max.Width Of PCB 400mm (Option:610mm 選項) A and B lanes width each 250mm or 1 lane 450mm and other lane 50mm 
導軌調寬範圍/調寬形式  50--400mm(Option:50--610mm 選項)/電動 Motorized 50--450mm/電動 Motorized  (相關A、B線的寬度組合請參考上一欄)
Range Of Rail Width/Adjustment (Width relate to A&B, please refer item above)
部品高度 Components Clearance PCB板上/下各25mm , Top/ Bottom Clearance of PCB is 25mm
運輸方向 Converyor Direction 左向右(選配: 右向左) L→R (Option: R→L)
運輸導軌固定方式 Fixed Rail Side 前端固定(選配:后端固定)Front Rail Fixed(Option:Rear Rail Fixed) 前後導軌固定,中央兩條活動.   Front and Rear Rails Fixed, 2 adjustable Rail at central.
PCB運輸方式 PCB Transmission Agent 空氣爐 Air-Reflow = 鏈條+網帶 Chain + Mesh ,  氮氣爐 N2-Reflow = 鏈條 Chain (可選配網帶 Mesh is option)       
中央支撐 Center Support (選配 Option) 防止PCB板因過寬及元器件過重而彎曲變形 Preventing PCB warp such too wide and heavy component load
運輸帶高度 Converyor Height 900±20mm
運輸速度 Converyor Speed Range 300~2000mm/min
Lubrication Auto-Afflux    潤滑油自動加註                  Standard
回流熱工學管理分析 Thermal Management System and Analysis System  
KIC RPI焊接質量檢測系統 KIC RPI Reflow Process Inspection 只標配于VS系列 ,  Standard for VS-series only
Temp. Thermocouple Slot 
溫度曲線測試線
4
Electrical Driven Top Hood Opening
電動打開上溫區蓋        
標準配置 Standard
Operation Mode: Operate / Demo / Edit
三種操作模式:   運行/演示/編輯
標準配置 Standard
On Line Editing      在線編輯功能            標準配置 Standard
Cooling Method 冷卻方式  Forced-Air 空氣冷卻 (標配Standard), Water-Chiller 冷水冷卻(選配Option)
帶氮氣系統機型 Model for Nitrogen Process  VS-800II-N / NS-800II-N VS-1000II-N / NS-1000II-N VS-800IIX-N / NS-800IIX-N VS-1000IIX-N / NS-1000IIX-N
電源功率要求 Electric Power Required 67KW 83KW 67KW 83KW
啟動功率 Power For Warm Up 32KW 38KW 34KW 40KW
正常功率消耗 Power Consumption 13KW 15KW 14KW 16KW
正常耗氮量 Nitrogen Consumption 20M3/hr. @ 300ppm~1000ppm (O2濃度 / O2 Concentration) ; 氮氣流量計 with N2 Flow Rate Meter
助焊劑管理 Flux Management System 氮氣爐膛標配空氣循環過濾,優化爐內環境,易於維護保養。Flux Reclaimed and Filtration standard for N2 Oven, easy clean-up. 
N2 containment at Entry and Exit End 
入口及出囗氮氣保護裝置 
標準配置 Standard
Flux Reclaim System
助焊劑回收系統 
標準配置 Standard
Nitrogen Flow Meter      氮氣流量計   標準配置 Standard
Oxygen Analyser      氧氣分析儀  選配 Option
Nitrogen Consumption [Standard] 
氮氣消耗量 (標準)  
400~1000PPM 20M³/H
Nitrogen consumption [Dilated hearth] 
氮氣消耗量 (加寬機
500~1000PPM 25~30M³/H
冷水機 Water Chiller 3 HP ; 外置式 External Stand-alone Type ; 充足冷卻能力滿足無鉛工藝要求 Powerful Cooling suit to Lead-Free Process Required
註明:氮氣機在尾號為"-N"的設備纔是標配 , Standard for N2 Oven Model With suffix of "-N" 


付款方式︰ 現金
交貨期︰ 一週

產品圖片