| 回流焊参数 |
| 型号 MODEL |
VS-800II / NS-800II |
VS-1000II / NS-1000II |
VS-800IIX / NS-800IIX |
VS-1000IIX / NS-1000IIX |
| 机体参数 GENERAL |
|
|
|
|
| 外型尺寸(L*W*H) Outside Dimension(L*W*H) |
5310x1353x1490mm |
6100x1353x1490mm |
5310x1580x1490mm |
6100x1580x1490mm |
| 颜色 Standard Color |
计算机灰 Computer Grey |
计算机灰 Computer Grey |
计算机灰 Computer Grey |
计算机灰 Computer Grey |
| 重量 Weight |
Approx.2250KG |
Approx.2450KG |
Approx.2350KG |
Approx.2550KG |
| 加热区数量 Number Of Heating Zones |
上Up8/下Bottom8 |
上Up10/下Bottom10 |
上Up8/下Bottom8 |
上Up10/下Bottom10 |
| 加热区长度 Length Of Heating Zones |
3121mm |
3891mm |
3121mm |
3891mm |
| 冷却区数量 Number Of Cooling Zones |
2(内置) |
| 排风量要求 Exhaust Volume |
10 M3 / min x 2 (通道) Exhausts |
| 控制部分参数 Standard Feature Of Control System |
| 电气要求 Electric Supply Required |
3 phase,380V 50/60Hz(optional: 3 phase,220V 50/60Hz 选配) |
| 电源功率要求 Electric Power Required |
64KW |
80KW |
64KW |
80KW |
| 启动功率 Power For Warm Up |
30KW |
36KW |
32KW |
38KW |
| 正常功率消耗 Power Consumption |
11KW |
13KW |
12KW |
14KW |
| 升温时间 Warming Time |
约 Approx.25 minute |
约 Approx.35 minute |
| 温度控制范围 Temp. Setting Range |
室温 Room Temp. --- 300℃ |
| 温度控制方式 Temperature Control Method |
PID闭环控制 + SSR驱动 / PID Close Loop Control + SSR Driving |
| 温度控制精度 Temperature Control Precision |
± 1.0℃ |
| PCB板温分布偏差 Temperature Deviation on PCB |
± 1.5℃ (by JT Board Test Standard) |
| 加热器 Heating Element |
Especial Heating elements For Long Life ; 特制的特长寿命加热器 |
| Commutated Element 整流板结构 |
Aluminium Alloy Plate 铝板 |
Max. Temp. Gap Between Preheat & Reflow Setting
预热区和焊接区之间的 温度设定差值 |
80℃ |
Max. Temp. Gap Between Preheat Zones Setting
预热区之间的 温度设定差值 |
40℃ |
Max. Temp. Gap Between Reflow Zones Setting
焊接区之间的 温度设定差值 |
50℃ |
| 参数存储 Data Storage |
可存多种生产设置参数与状况 Process Data and Status Storage (80GB) |
| 异常报警 Abnormal Alarm |
温度异常（恒温后超高温或超低温）Abnormal Temperature (Extra-high / Extra-low Temp.) |
| 掉板报警 Board Dropped Alarm |
三色信号灯: 黄-升温；绿-恒温；红-异常 Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal |
| 运输参数 Standard Features Of Conveyor System |
|
| 导轨数量 |
1 Lane |
2 Lanes |
| Rail Structure 导轨结构 |
Subsection Integrated Type 整体分段式 Subsection Separate Control分段独立控制(Option选配) |
| PCB 宽度 Max.Width Of PCB |
400mm (Option:610mm 选项) |
A and B lanes width each 250mm or 1 lane 450mm and other lane 50mm |
| 导轨调宽范围/调宽形式 |
50--400mm(Option:50--610mm 选项)/电动 Motorized |
50--450mm/电动 Motorized |
(相关A、B线的宽度组合请参考上一栏) |
| Range Of Rail Width/Adjustment |
(Width relate to A&B, please refer item above) |
| 部品高度 Components Clearance |
PCB板上/下各25mm , Top/ Bottom Clearance of PCB is 25mm |
| 运输方向 Converyor Direction |
左向右(选配: 右向左) L→R (Option: R→L) |
| 运输导轨固定方式 Fixed Rail Side |
前端固定(选配:后端固定)Front Rail Fixed(Option:Rear Rail Fixed) |
前后导轨固定，中央两条活动. Front and Rear Rails Fixed, 2 adjustable Rail at central. |
| PCB运输方式 PCB Transmission Agent |
空气炉 Air-Reflow = 链条+网带 Chain + Mesh , 氮气炉 N2-Reflow = 链条 Chain (可选配网带 Mesh is option) |
|
|
|
| 中央支撑 Center Support (选配 Option) |
防止PCB板因过宽及元器件过重而弯曲变形 Preventing PCB warp such too wide and heavy component load |
| 运输带高度 Converyor Height |
900±20mm |
| 运输速度 Converyor Speed Range |
300～2000mm/min |
| Lubrication Auto-Afflux 润滑油自动加注 |
Standard |
| 回流热工学管理分析 Thermal Management System and Analysis System |
|
| KIC RPI焊接质量检测系统 KIC RPI Reflow Process Inspection |
只标配于VS系列 , Standard for VS-series only |
Temp. Thermocouple Slot
温度曲线测试线 |
4 |
Electrical Driven Top Hood Opening
电动打开上温区盖 |
标准配置 Standard |
Operation Mode: Operate / Demo / Edit
三种操作模式: 运行/演示/编辑 |
标准配置 Standard |
| On Line Editing 在线编辑功能 |
标准配置 Standard |
| Cooling Method 冷却方式 |
Forced-Air 空气冷却 (标配Standard), Water-Chiller 冷水冷却(选配Option) |
| 带氮气系统机型 Model for Nitrogen Process |
VS-800II-N / NS-800II-N |
VS-1000II-N / NS-1000II-N |
VS-800IIX-N / NS-800IIX-N |
VS-1000IIX-N / NS-1000IIX-N |
| 电源功率要求 Electric Power Required |
67KW |
83KW |
67KW |
83KW |
| 启动功率 Power For Warm Up |
32KW |
38KW |
34KW |
40KW |
| 正常功率消耗 Power Consumption |
13KW |
15KW |
14KW |
16KW |
| 正常耗氮量 Nitrogen Consumption |
20M3/hr. @ 300ppm~1000ppm (O2浓度 / O2 Concentration) ; 氮气流量计 with N2 Flow Rate Meter |
| 助焊剂管理 Flux Management System |
氮气炉膛标配空气循环过滤，优化炉内环境，易于维护保养。Flux Reclaimed and Filtration standard for N2 Oven, easy clean-up. |
N2 containment at Entry and Exit End
入口及出囗氮气保护装置 |
标准配置 Standard |
Flux Reclaim System
助焊剂回收系统 |
标准配置 Standard |
| Nitrogen Flow Meter 氮气流量计 |
标准配置 Standard |
| Oxygen Analyser 氧气分析仪 |
选配 Option |
Nitrogen Consumption [Standard]
氮气消耗量 (标准) |
400~1000PPM 20M³/H |
Nitrogen consumption [Dilated hearth]
氮气消耗量 (加宽机) |
500~1000PPM 25~30M³/H |
| 冷水机 Water Chiller |
3 HP ; 外置式 External Stand-alone Type ; 充足冷却能力满足无铅工艺要求 Powerful Cooling suit to Lead-Free Process Required |
| 注明：氮气机在尾号为"-N"的设备才是标配 , Standard for N2 Oven Model With suffix of "-N" |
